Kansas

Last updated on 2014-01-16

Current CodeNone Statewide
Amendments / Additional State Code InformationThe State has adopted the 2006 IECC as the applicable EE standard for commercial and industrial buildings in Kansas (KSA 66-1227). The same law also states that "the state corporation commission has no authority to adopt or enforce energy efficiency standards for residential, commercial, or industrial structures."

Approved Compliance ToolsCan use COMcheck
State Specific Research Impacts of ASHRAE 90.1-2007 for Commercial Buildings in the State of Kansas (BECP Report, Sept. 2009)
Effective Date04/10/2007
Code EnforcementVoluntary
DOE DeterminationASHRAE 90.1-2007: No
ASHRAE 90.1-2010: No

Energy cost savings for Kansas resulting from the state updating its commercial and residential building energy codes in accordance with federal law are significant, estimated to be on the order of nearly $90 million annually by 2030.

Kansas DOE Determination Letter, May 31, 2013


Current CodeNone Statewide
Amendments / Additional State Code InformationHomebuilders or realtors must disclose information about the home energy performance parameters on the Kansas Energy Efficiency Disclosure form and provide it to potential buyers.

Approved Compliance Tools
State Specific Research Impacts of the 2009 IECC for Residential Buildings in the State of Kansas (BECP Report, Sept. 2009)
Effective Date
Code Enforcement
DOE Determination2009 IECC: No
2012 IECC: No

Energy cost savings for Kansas resulting from the state updating its commercial and residential building energy codes in accordance with federal law are significant, estimated to be on the order of nearly $90 million annually by 2030.

Kansas DOE Determination Letter, May 31, 2013


Code Change ProcessLegislative
Code Change CycleNone

Adoption Process

Legislative action would be required to amend the code adopted by the state.

Enforcement Process

Local jurisdictions do not enforce the statewide energy standards. The state conducts enforcement activities for state-owned buildings.

Compliance Process

The statewide energy standards require an energy efficiency disclosure by the builder or seller of new residential buildings to the buyer. The disclosure provides the energy attributes of the structure. The REScheck compliance materials developed by the U.S. Department of Energy are one of several ways to show compliance with the 2006 IECC. No formal plan review or construction inspection is required. The potential for litigation exists as a way to ensure compliance for commercial and industrial buildings.

Background

During the 1975, 1976, and 1977 legislative sessions, both the Kansas Legislative Special Committee on Energy and Natural Resources and the Kansas House Committee on Energy and Natural Resources considered bills that would have enacted statewide building codes addressing energy efficiency. These legislative attempts failed, and in 1977 the House Committee abandoned an attempt to pass a bill in favor of allowing the Kansas Corporation Commission (KCC) to address the issue in a Show Cause Order issued under Docket 110,766-U.

Thermal standards as well as air-conditioning equipment efficiency were subsequently adopted by the KCC order in September 1977 under Docket 110,766-U. Under the order, each electric and gas utility required a certificate of compliance with the adopted standards from the owner of each newly constructed residential or commercial building before the utility could provide permanent service. The thermal standards (maximum heat loss as a function of floor area) adopted at that time presented a problem because not all electric and gas utilities were under KCC jurisdiction.

To address that concern, the 1978 legislative session adopted Kansas Statutes Annotated 66-131a, HB 2698, giving the KCC jurisdiction over municipal electric and natural gas utilities to restrict connections to buildings not meeting the standards. Gas utilities were only required to ensure compliance with the insulation requirements of the order, while electric utilities were required to ensure compliance with both the insulation and air-conditioning equipment efficiency requirements.

In 1979 the legislature approved the adoption of Kansas Administrative Regulation 27-2-1, establishing maximum lighting efficiency standards for public buildings. The thermal standards were in effect for all Kansas electric and natural gas utilities until 1992. The 1992 legislative session adopted Kansas Statutes Annotated 66-104d, SB 435, which allowed electric cooperatives the option of deregulation.

The KCC formally adopted the 1993 MEC and ASHRAE/IESNA 90.1-1989 on January 23, 1996. On April 24, 1997, Kansas Governor Bill Graves signed legislation (SB 333) to retain the 1993 MEC for residential construction referenced in the state energy efficiency policy. In addition, Section 17 of SB 333 adopted ASHRAE/IESNA 90.1-1989 (standard or code) for new commercial and industrial structures, although it did not define "commercial" or "industrial." The legislature, through Section 17, also assumed authority for building energy standards from the KCC. The KCC was still responsible for commercial and residential energy code training and educational seminars.

In 2007, Kansas had adopted the 2006 IECC as the applicable energy efficiency standard for commercial and industrial structures in the state. No enforcement mechanism was provided in the statute (KSA 66-1227).

The Energy Efficiency Building Codes Working Group was established in May 2009 to ensure compliance with the federal energy code requirement for states receiving federal Recovery Act funds. The Working Group met several times during 2009 and adopted a preliminary plan to achieve compliance with the following goal:

  • By 2017, 90% of new and renovated residential structures in Kansas meet the 2009 IECC standards, and 90% of new and renovated commercial structures meet the ANSI/ASHRAE/IESNA Standard 90.1-2007.