Subscribe to updates
To receive updates about compliance tools subscribe to the BECP Mailing List.
Residential Compliance Using REScheck™
The REScheck product group makes it fast and easy for builders, designers, and contractors to determine whether new homes, additions, and alterations meet the requirements of the IECC or a number of state energy codes. REScheck also simplifies compliance determinations for building officials, plan checkers, and inspectors by allowing them to quickly determine if a low-rise residence meets the code.
REScheck is appropriate for insulation and window trade-off calculations in residential detached one- and two-family buildings and multi-family buildings three stories or less in height above grade, such as apartments, condominiums, and townhouses. REScheck works by performing a simple U-factor x Area (UA) calculation for each building assembly to determine the overall UA of a building. The UA that would result from a building conforming to the code requirements is compared against the UA for your building. If the total heat loss (represented as a UA) through the envelope of your building does not exceed the total heat loss from the same building conforming to the code, the software generates a report that declares your building is compliant with the code.
REScheck Desktop can be downloaded and installed directly to your desktop, while REScheck-Web™ is accessible directly from the website without having to download and install.
REScheck™ for Windows®
Version 4.5.0 (Build Version: 220.127.116.11)
Runs on Windows 2000, XP, Vista, or Windows 7 in either single, multi-user, or network environments
2006, 2007 (supplement to 2006 IECC), 2009 and 2012 IECC; 2006 IRC; and various state and county energy codes.
REScheck 18.104.22.168 includes the redesigned Inspection Checklist and Requirements screen for 2012 IECC. This release also adds support for the 2012 Washington State Energy Code, the Illinois Energy Conservation Code, the Utah Energy Conservation Code, and discontinues support for the 2000 and 2003 IECC energy codes.
The redesigned Inspection Checklist organizes code requirements by stage of construction, provides code section numbers corresponding to each code requirement, and provides online links to references and clarifications for most code requirements. Coupled with this report redesign is the Requirements screen within the REScheck user interface that gives the user an ability to review, verify, and document mandatory and prescriptive energy code requirements that are listed in the Inspection Checklist.
REScheck™ for Mac®
The Mac version of REScheck has been discontinued. Users are advised to use REScheck-Web
REScheck-Web simplifies residential energy code compliance by automating tradeoff calculations for the IECC and a number of state-specific codes. It performs just like the REScheck desktop version, but you don't need to download or install any software on your computer.
Have a compliance question or need assistance with the software?
BECP's team of building energy codes experts is available to answer specific questions submitted through our web-based help desk.