Wyoming

Adoption Process:

Proposed changes to the state energy code may be submitted to the Wyoming Department of Fire Prevention and Electrical Safety (DFPES). The DFPES reviews proposed changes and submits its recommendations to the Governor-appointed Building Codes Council. Changes approved by the council are then adopted at the annual September meeting and become effective in January of the following year. Local adoption is required before energy provisions can be enforced.

Enforcement Process:

Towns and counties that are established as local enforcement may, but are not required to, enforce an energy code at the local level. Currently, 20 towns and counties are established as local enforcement. As part of their normal building inspection process, the enforcement agency performs field inspections in these towns and counties. The DFPES has the authority to issue written interpretations.

Compliance Process:

Compliance is determined by plan review and inspection by local code officials in jurisdictions that have adopted energy provisions as a part of their building code.

Background / History:

The 1976 edition of the Uniform Codes was adopted in 1977. Prior to 1977, the State Fire Marshal's Office adopted and enforced the National Fire Prevention Agency standards. Since 1977, the state has adopted the current version of the Uniform Building Code consistent with its three-year publication cycle. The current energy provisions are contained in Appendix Chapter 53 of the 1991 Uniform Building Code, which references the 1989 Council of American Building Officials (CABO) Model Energy Code (MEC).

Programs and Incentives:

Financial Incentives: http://www.dsireusa.org/incentives/index.cfm?re=1&ee=1&spv=0&st=0&srp=1&state=WY

Programs and Incentives:

Financial Incentives

Code (Baseline):

None Statewide

Code (Baseline):

None Statewide

Approximate Energy Efficiency:

Less energy efficient than

Approximate Energy Efficiency:

Less energy efficient than

Code - Enforcement:

Voluntary

Code - Enforcement:

Voluntary

Approved Compliance Tools:

REScheck

DOE Determination:

ASHRAE Standard 90.1-2007: No ASHRAE Standard 90.1-2010: No

DOE Determination:

2009 IECC: No 2012 IECC: No

Code Change Process:

Both Regulatory and Legislative

Code Change Cycle:

Reviewed

Code Change Cycle - Time Line:

Every 3 years

Effective Date:

Wednesday, August 13, 2008

Effective Date:

Wednesday, August 13, 2008

Approved Compliance Tools Information:

Can use COM<em>check</em> in areas that have adopted more recent codes and allow its use.

State Specific Research:

Impacts of ASHRAE Standard 90.1-2007 for Commercial Buildings in the State of Wyoming (BECP Report, Sept. 2009): /sites/default/files/documents/Commercial_Wisconsin.pdf

Approved Compliance Tools Information:

Can use RES<em>check</em> in areas that have adopted more recent codes and allow its use.

State Specific Research:

Impacts of the 2009 IECC for Residential Buildings in the State of Wyoming (BECP Report, Sept. 2009): /sites/default/files/documents/Residential_Wisconsin_0.pdf

Amendments:

The International Conference of Building Officials (ICBO) Uniform Building Code, which is based on the 1989 Model Energy Code (MEC), may be adopted and enforced by local jurisdictions.

Amendments:

The ICBO Uniform Building Code, which is based on the 1989 MEC, may be adopted and enforced by local jurisdictions.

Approximate Energy Efficiency Code:

2003 IECC

Approximate Energy Efficiency Code:

2003 IECC

Approved Compliance Tools:

COMcheck