All landscaping, except native plants, drought-tolerant landscape and that of single family residential homes, must be equipped with irrigation systems that are designed to avoid runoff, low-head drainage, and over spray. Turf areas must utilize low-volume irrigation and be on a separate line from plant irrigation.
Technical assistance and financial incentives must be established to encourage compliance with a variety of established third party programs. Commercial projects receive rebates based on level of LEED certification, while residential projects receive rebates based on the number of units certified. All new municipal buildings over 10,000 ft2 must be LEED Certified
All applicants with buildings or renovations/additions seeking LEED certification in Ashland will receive priority plan checks.
The Arlington County Green Building Density Incentive Policy applies to special exception site plan requests for bonus density and/or height. The program uses the LEED rating system as a standard for measuring each project. The floor area ratio (FAR) bonus depends on the level of LEED Certification and building type (commercial, high-rise residential). The County established a Green Building Fund; builders that do not commit to a LEED rating contribute to the Fund. The contribution is calculated at a rate of $0.045 per square foot. (This calculation is based on the fees assessed by the U.S. Green Building Council for registration and evaluation of a formal LEED application.) The Green Building Fund is used to provide education and outreach to developers and the community on green building issues. Developers must post a bond or letter of credit before a certificate of occupancy is issued. If a project receives LEED certification from the USGBC, the Fund contribution is...
Public Resources Code Section 25402.1(h)2 and Section 10-106 of the Building Energy Efficiency Standards establish a process which allows local adoption of energy standards that are more energy efficient than the statewide Standards. This process allows local governments to adopt and enforce energy standards before the statewide Standards effective date, require additional energy conservation measures, and/or set stricter energy budgets. Local governments are required to apply to the Energy Commission for approval, documenting the supporting analysis for how the local government has determined that their proposed Standards will save more energy than the current statewide Standards and the basis of the local government's determination that the local standards are cost-effective. Once the Energy Commission staff has verified that the local standards will require buildings to use no more energy than the current statewide Standards and that the documentation requirements...
Index of Green Building Provisions in Florida Municipal Codes, 2009
The purpose of this document is to compile and summarize city and county ordinances that provide incentives or regulations to promote sustainable development. City or county officials can use this document to aid in drafting sustainable development policies for their local area. The goal of this booklet is to increase knowledge and awareness of current policies and ordinances created around the theme of sustainable development and conservation.
SBC-11 involves education and training requirements for building inspectors and code officials.
The Iowa Building Code Commission has the authority to adopt and amend the building codes. The state energy code is reviewed on a 3-year code cycle corresponding to publication of the IECC. Iowa has consistently adopted the IECC published version the past three code cycles. Iowa adopted the 2009 IECC on January 1, 2010.
The Idaho Building Code Board has authority to adopt and amend building codes pursuant to I.C. Section 39-4109. Updated codes are adopted every 3 years by the Idaho Legislature as they are revised by the International Code Council. Idaho has consistently adopted the IECC published versions the past four code cycles. Idaho adopted the 2009 IECC on January 1, 2011.
The Oregon Energy Efficiency Specialty Code Envelope Compliance Certificate for Commercial Buildings is used to demonstrate compliance with the mandatory requirements of the Oregon Energy Efficiency Specialty code.
The Michigan Construction Code commercial provisions include adoption of the 2009 IECC.