Publications

To receive updates about BECP publications subscribe to the BECP Mailing List.

Additional resources are also available from the Building America Solution Center.


Document type: Presentation
Publication Date: June 2011
Focus: Code Development, Green and Advanced Codes

Presentation given at the ASHRAE Annual Meeting, ASHRAE Standard 189.1 Committee; June 29, 2011; Montreal Canada.

Main topics included:

  • Progress Indicator and Prototype Models developed by Pacific Northwest National Laboratory
  • Energy Use Comparison Between ASHRAE Standards 189.1-2009 and 90.1-2010
Document type: Analysis, Technical Support Document
Publication Date: August 2014
Focus: Code Development

This report documents the technical analysis used to evaluate whether residential buildings constructed to meet the requirements of the 2015 IECC would result in energy efficiency improvements over residential buildings constructed to meet the requirements of the previous edition, the 2012 IECC.

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Model Data
Publication Date:
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Other
Publication Date: September 2012
Focus: Adoption, Code Development, Compliance, Enforcement

Buildings account for almost 40% of the energy used in the United States and, as a direct result of that use, our environment and economy are impacted. Building energy codes and standards provide an effective response. The Building Energy Codes Program designed the Adoption, Compliance, and Enforcement (ACE) Learning Series for those in the building industry having the greatest potential to influence the adoption of and compliance with building energy codes and standards. Each toolkit in the ACE Learning Series delivers essential information to enable designers, specifiers, builders, building owners, policy makers, code officials, and others involved in building design and construction to understand the important role building energy codes play in helping us all address our energy, economic, and environmental challenges.

Document type: Presentation
Publication Date: January 2012
Focus: Code Development

Presentation given at the ASHRAE 2012 Winter Meeting, ASHRAE Standard 90.1 Committee; January 22, 2012; Chicago, Illinois.

Topics included:

  • ASHRAE Standard 90.1 Progress Indicator
  • ASHRAE Standard 90.1-2013 Addenda
  • Energy and Cost Saving Results
  • 50% Concept Ideas and Energy Savings
Document type: Reports and Studies
Publication Date: May 2011
Focus: Code Development

This report documents the progress indicator (PI) process and analysis that Pacific Northwest National Laboratory (PNNL) developed to evaluate the potential energy savings from the application of ASHRAE Standard 90.1-2010 to building design and construction compared to the application of ASHRAE Standard 90.1-2004. The report describes PNNL’s EnergyPlus simulation framework, and the building prototype simulation models. The combined upgrades from ASHRAE Standard 90.1 -2004 to ASHRAE Standard 90.1-2010 are described, and consist of a total of 153 approved addenda (44 addenda to ASHRAE Standard 90.1-2007 and 109 addenda to ASHRAE Standard 90.1-2010). PNNL reviewed and considered all 153 addenda for quantitative analysis in the PI process. Fifty-three of those addenda are included in the quantitative analysis. This report provides information on the categorization of all of the addenda, a summary of the content, and a more in-depth explanation of the impact and modeling of the...

Document type: Analysis, Determination
Publication Date: October 2011
Focus: Code Development

A final qualitative analysis of all addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1-2010 was conducted. All 109 addenda processed by ASHRAE in the creation of ASHRAE Standard 90.1-2010 from ASHRAE Standard 90.1-2007 were evaluated by the U.S. Department of Energy (DOE) for their impact on energy efficiency. DOE determined whether each addendum would have a positive, neutral, or negative impact on overall building efficiency.

Document type: Analysis, Determination
Publication Date: October 2011
Focus: Code Development

The U.S. Department of Energy (DOE) conducted a final quantitative analysis to assess whether buildings constructed according to the requirements of ASHRAE Standard 90.1-2010 would result in energy savings compared with buildings constructed to ASHRAE Standard 90.1- 2007. The final analysis considered each of the 109 addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1- 2010. All 109 addenda processed by ASHRAE in the creation of ASHRAE Standard 90.1-2010 from ASHRAE Standard 90.1-2007 were reviewed by DOE, and their combined impact on a suite of 16 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE’s final determination. However, out of the 109 addenda, 34 were preliminarily determined to have a measureable and quantifiable impact.

Document type: Analysis, Technical Support Document
Publication Date: August 2014
Focus: Code Development

This report provides the qualitative analysis of all addenda to ANSI/ASHRAE/IES1 Standard 90.1-2010 (referred to as Standard 90.1-2010 or 2010 edition) that were included in ANSI/ASHRAE/IES Standard 90.1-2013 (referred to as Standard 90.1-2013 or 2013 edition). All addenda in creating Standard 90.1-2013 were evaluated for their projected impact on energy efficiency. Each addendum was characterized as having a positive, neutral, or negative impact on overall building energy efficiency.

Document type: Analysis, Determination
Publication Date: March 2014
Focus: Code Development

This report provides a preliminary qualitative analysis of all addenda to ANSI/ASHRAE/IES Standard 90.1-2010 (referred to as Standard 90.1-2010 or 2010 edition) that were included in ANSI/ASHRAE/IES Standard 90.1-2013 (referred to as Standard 90.1-2013 or 2013 edition). All addenda in creating Standard 90.1-2013 were evaluated for their projected impact on energy efficiency. Each addendum was characterized as having a positive, neutral, or negative impact on overall building energy efficiency.

Document type: Analysis, Determination
Publication Date: March 2014
Focus: Code Development

This report provides a preliminary quantitative analysis to assess whether buildings constructed according to the requirements of ANSI/ASHRAE/IES Standard 90.1-2013 would result in improved energy efficiency in commercial buildings. The preliminary analysis considered each of the 110 addenda to Standard 90.1-2010 that were included in Standard 90.1-2013. PNNL reviewed all addenda included by ASHRAE in creating Standard 90.1-2013 from Standard 90.1-2010, and considered their combined impact on a suite of prototype building models across all U.S. climate zones. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE’s preliminary determination. However, out of the 110 total addenda, 30 were identified as having a measureable and quantifiable impact.

Document type: Analysis, Determination
Publication Date: May 2011
Focus: Code Development

The United States (U.S.) Department of Energy (DOE) conducted a final quantitative analysis to assess whether buildings constructed according to the requirements of the ASHRAE Standard 90.1-2007 would result in energy savings compared with buildings constructed to ASHRAE Standard 90.1-2004. The final analysis considered each of the 44 addenda to ASHRAE Standard 90.1-2004 that were included in ASHRAE Standard 90.1-2007. All 44 addenda processed by ASHRAE in the creation of Standard 90.1-2007 from ASHRAE Standard 90.1-2004 were reviewed by DOE, and their combined impact on a suite of 15 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE’s final determination. However, out of the 44 addenda, 9 were preliminarily determined to have measureable and quantifiable impact.

Document type: Analysis, Determination
Publication Date: January 2011
Focus: Code Development

A final qualitative analysis of all addenda to ASHRAE Standard 90.1-2004 that were included in ASHRAE Standard 90.1-2007 was conducted. All 44 addenda processed by ASHRAE in the creation of ASHRAE Standard 90.1-2007 from ASHRAE Standard 90.1-2004 were evaluated by the U.S. Department of Energy (DOE) for their impact on energy efficiency. DOE preliminarily determined whether that addenda would have a positive, neutral, or negative impact on overall building efficiency.

Document type: Other, Program Information, Reports and Studies
Publication Date: February 2010
Focus: Adoption, Code Development, Compliance

In order to provide a basic introduction to the varied and complex issues associated with building energy codes, the U.S. Department of Energy’s Building Energy Codes Program, with valued assistance from the International Codes Council and ASHRAE, has prepared Building Energy Codes 101: An Introduction. This guide is designed to speak to a broad audience with an interest in building energy efficiency, including state energy officials, architects, engineers, designers, and members of the public.

Document type: Resource Guide
Publication Date: June 2011
Focus: Adoption, Code Development, Compliance

This guide provides key information to policy makers on energy codes and standards and offers guidance on how policy makers can support the creation of statewide energy efficiency goals and standards. In addition, this guide instructs policy makers on how they can:

  • Encourage the adoption of statewide codes.
  • Establish energy code awareness programs.
  • Support enforcement of and compliance with energy codes.
  • Participate in the development of model codes and standards.
  • Determine the viability of the new code.
Document type: Comparison
Publication Date: December 2009
Focus: Code Development

This report addresses the comparability of the 2009 International Energy Conservation Code as applied to commercial buildings and ASHRAE Standard 90.1-2007.

Document type: Comparison
Publication Date: December 2006
Focus: Code Development

This document presents the qualitative comparison of the U.S. Department of Energy's (DOE’s) formal determination of energy savings of ASHRAE Standard 90.1-2004. The term “qualitative” is used in the sense of identifying whether or not changes have a positive, negative, or neutral impact on energy efficiency of the standard, with no attempt made to quantify that impact. A companion document will present the quantitative comparison of DOE’s determination.

Document type: Model Data
Publication Date:
Focus: Code Development

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. This suite of ASHRAE Standard 90.1 prototype buildings covers all the Reference Building types except supermarket, and also adds a new building prototype representing high-rise apartment buildings.The prototype models include 16 building types in 17 climate locations for ASHRAE Standards 90.1-2004, 90.1-2007,  90.1-2010, and 90.1-2013. This combination leads to a set of 1088 building models (in EnergyPlus Version 8.0). Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key...

Document type: Reports and Studies
Publication Date: April 2009
Focus: Adoption, Code Development, Compliance

At the request of the U.S. Department of Energy, the Joint Global Change Research Institute has prepared a series of reports surveying building energy codes in seven of the Asia-Pacific Partnership on Clean Energy and Climate (APP) countries. These reports include country reports on building energy codes in each APP partner country and a comparative report based on the country reports.

Document type: Determination
Publication Date:
Focus: Code Development

The Energy Conservation and Production Act provides that whenever the ASHRAE Standard 90.1-1989, or any successor to that code is revised, the Secretary of Energy must determine whether the revised code would improve energy efficiency in commercial buildings

The U.S. Department of Energy has performed both a quantitative analysis of the likely impacts of the revised code on the energy efficiency of seven categories of new commercial buildings, compared to the 1989 edition, and a non-quantitative assessment of the comparative stringency of those elements of the revised code that could not be analyzed quantitatively.

The quantitative analysis concluded that the1999 revision of the code would likely reduce the source energy consumption of new commercial buildings by approximately 5.9 percent. Site energy savings were estimated to be approximately 3.9 percent. The comparative assessment of those elements of the 1989 and 1999 revised codes that could not be...

Document type: Determination
Publication Date: July 2005
Focus: Code Development

The U.S. Department of Energy (DOE) determined that ASHRAE Standard 90.1-1999, would achieve greater energy efficiency in buildings, except low-rise residential buildings, than ASHRAE Standard 90.1-1989. As a result of this positive determination regarding ASHRAE Standard 90.1-1999, each state is required to certify that it has reviewed and updated the provisions of its commercial building code regarding energy efficiency to meet or exceed ASHRAE Standard 90.1-1999 for any “building” within the meaning of Section 303(2) of the Energy Conservation and Production Act of 1976, as amended. This Notice provides guidance to states on certifications, and requests for extensions of deadlines for certification statements.

Document type: Presentation
Publication Date: July 2009
Focus: Code Development

This July 2009 presentation details the U.S. Department of Energy Building Energy Codes Program's game plan and progress report regarding the development of energy efficiency standards for manufactured housing.

Document type: Brochures/Fliers, Program Information
Publication Date: July 2011
Focus: Adoption, Code Development, Compliance

As our country continues to focus on saving energy and reducing emissions in the face of global climate change, it is turning to the building sector for viable solutions. The effects of energy use in residential and commercial buildings are nationwide, worldwide and varied. In the U.S. alone, residential and commercial buildings account for 40% of all energy consumption and 70% of electricity usage.

Document type: Proposals
Publication Date: March 2010
Focus: Code Development

The U.S. Department of Energy submitted 56 code change proposals for the International Code Council's (ICC) Code Development Cycle produced the 2012 I-codes. Thirty-two of the proposals were primarily related to commercial buildings, 24 were for residential buildings. The proposals were mainly to the International Energy Conservation Code (IECC) though most of the residential proposals also applied to Chapter 11 of the International Residential Code.

The central theme of the DOE proposals is to improve energy efficiency. Additionally, for commercial buildings DOE attempted to make the IECC more consistent with ASHRAE Standard 90.1. Finally, some proposals were not intended to change requirements but rather improve the usability of the codes, fix wording, correct errors, etc.

DOE invited discussion on these proposals and on preparations for the ICC code hearings that took place from October 24 through November 11, 2009, in Baltimore, Maryland.

The proposals are...

Document type: Reports and Studies
Publication Date: September 2012
Focus: Code Development

The purpose of this analysis is to assess the relative energy and energy cost performance of commercial buildings designed to meet the requirements found in the commercial energy efficiency provisions of the International Energy Conservation Code (IECC). Section 304(b) of the Energy Conservation and Production Act (ECPA), as amended, requires the Secretary of Energy to make a determination each time a revised version of ASHRAE Standard 90.1 is published with respect to whether the revised standard would improve energy efficiency in commercial buildings. As many states have historically adopted the IECC for both residential and commercial buildings, PNNL has evaluated the impacts of the commercial provisions of the 2006, 2009, and 2012 editions of the IECC. PNNL also compared energy performance with corresponding editions of ANSI/ASHRAE/IES Standard 90.1 to help states and local jurisdictions make informed decisions regarding model code adoption.

Document type: Analysis
Publication Date: April 2013
Focus: Code Development

The 2009 and 2012 International Energy Conservation Codes (IECC) require a substantial improvement in energy efficiency compared to the 2006 IECC. This report averages the energy use savings for a typical new residential dwelling unit based on the 2009 and 2012 IECC compared to the 2006 IECC. Results are reported by the eight climate zones in the IECC and for the national average.

Document type: Model Data
Publication Date: April 2011
Focus: Code Development

The following are the EnergyPlus TMY2 weather files for 17 climate locations associated with the ASHRAE Standard 90.1 Prototype Building Models.

Document type: Model Data
Publication Date: April 2014
Focus: Code Development

Complete set of the EnergyPlus TMY3 weather files for 17 climate locations associated with the ASHRAE Standard 90.1 Prototype Building Models. See the Commercial Prototype Building Models page for the individual weather data files by Climate Zone.

Document type: Model Data
Publication Date: April 2014
Focus: Code Development

Since the last publication of the commercial prototype building models, PNNL has made numerous enhancements to the original prototype models compliant with the 2004, 2007, and 2010 editions of Standard 90.1. Those enhancements are described here and were made for several reasons: (1) to change or improve prototype design assumptions; (2) to improve simulation accuracy; (3) to improve simulation infrastructure; and (4) to add additional detail to the models needed to capture certain energy impacts from Standard 90.1 improvements.

Document type: Resource Guide
Publication Date: September 2011
Focus: Adoption, Code Development, Green and Advanced Codes

The Going Beyond Code Guide is designed to help state and local governments design and implement successful "beyond code" programs for new commercial and residential buildings. The goal is to help states and localities establish voluntary or mandatory programs that go well beyond traditional minimum code requirements for new buildings.

Document type: Reports and Studies
Publication Date: May 2014
Focus: Adoption, Code Development, Compliance, Residential

Pacific Northwest National Laboratory analyzed the relationship between the Residential Energy Services Network (RESNET) Home Energy Rating System (HERS) Index and the traditional simulation-based Performance Path used in the International Energy Conservation Code (IECC). The analysis evaluates, for a single-family residence with various characteristics, the ranges of HERS Index values that would imply compliance with the 2012 IECC Performance Path. Several building characteristics considered likely to result in quantifiable differences in the outcomes of the two approaches, or otherwise believed to be of interest to code developers and policy makers, are considered in the analysis.

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Alabama, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Alaska, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Arizona, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Arkansas, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of California, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Colorado, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: April 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

Complete IECC Prototype Building Model packages include files for every state by IECC version.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Note: each of these files are over 100 MB in size; download times may vary.

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Connecticut, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Delaware, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the District of Columbia, using a customized version of the 2009 IECC as the baseline code with improved wall and ceiling insulation levels.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Florida, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Georgia, using a customized version of the 2009 IECC as the baseline code with better windows.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Hawaii, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Idaho, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Illinois, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Indiana, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Iowa, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2011
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Kansas, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Kentucky, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Louisiana, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Maine, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Maryland, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Massachusetts, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Michigan, using a customized version of the 2009 IECC as the baseline code without duct testing requirements.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Minnesota, using a customozed version of the 2006 IECC as the baseline code with lower wall and ceiling insulation levels.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Mississippi, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Missouri, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Montana, using a customized version of the 2009 IECC as the baseline code with R-21 walls and U-0.33 windows.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Nebraska, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Nevada, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of New Hampshire, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of New Jersey, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of New Mexico, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of New York, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of North Carolina, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of North Dakota, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Ohio, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date:
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Oklahoma, using a customized version of the 2009 IECC as the baseline code with improved windows in climate zone 3.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Oregon, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Pennsylvania, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Rhode Island, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of South Carolina, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of South Dakota, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Tennessee, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2011
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Texas, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Utah, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Vermont, using a customized version of the 2009 IECC as the baseline code with better slab insulation and windows and tighter duct sealing.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Virginia, using a customized version of the 2009 IECC as the baseline code without duct testing requirements.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Washington, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of West Virginia, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Wisconsin, using a customized version of the 2006 IECC as the baseline code with improved wall insulation and windows.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Model Data
Publication Date: May 2012
Focus: Code Development

The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.

This set of IECC Prototype Building Models is for the state of Wyoming, using the 2006 IECC as the baseline code.

Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).

Document type: Proposals
Publication Date: March 2010
Focus: Code Development

The New Buildings Institute (NBI) and American Institute of Architects believe that the 20% to 30% reductions in commercial and high-rise residential building energy use based on this proposal are practical, feasible, and necessary. This proposal employs improvements to design practices and use of widely available products to improve energy efficiency. Many of the elements have been previously published in NBI’s Core Performance Guide and implemented in programs or codes at the local and state levels. Incorporating these enhancements in a model code will help move building practices and markets more quickly, addressing national concerns for energy and the environment in a pragmatic and cost-effective way.

Document type: Resource Guide
Publication Date: September 2012
Focus: Adoption, Code Development, Compliance

This guide provides information for anyone dealing with a lighting energy code or standard. It provides background and development information to help readers understand the basis for requirements and their intent. The guide also provides detailed explanations of the major types of requirements such that users can more effectively design to meet compliance while applying the most flexibility possible.

Pages