Hawaii

Current News: 
The Hawaii Energy Code (HEC) adopted the 2015 IECC and ASHRAE 90.1-2013 with amendments by the State Building Council on July 14, 2015. The HEC must be adopted separately by the four counties. State law (Act 164, 2014), requires that if the counties do not adopt HEC by 2017, the HEC becomes the interim code for the counties.
Current Code:
2015 IECC with Amendments
Amendments / Additional State Code Information: - Sub-metering in new buildings with tenant spaces > 1,000 square feet - In-room energy management systems, Section C405.2.4 amended to apply to: all hotels, motels, and time-share condominiums, include ventilation and air conditioning (HVAC) systems, include requirement for a mechanism that shuts off the HVAC for the room when exterior doors to the room are open. - Alternatives for wall insulation will be permitted depending upon the assembly type and exterior shading.

Approved Compliance Tools: Can use COMcheck
Approximate Energy Efficiency: Equivalent to 2015 IECC
Adoption Date:
Jul. 14, 2015
Code Enforcement:
Mandatory
Jurisdictions:
County Energy Code Status: http://energy.hawaii.gov/hawaii-energy-building-code
DOE Determination: ASHRAE 90.1-2007: Yes
ASHRAE 90.1-2010: Yes
ASHRAE 90.1-2013: No

Energy cost savings for Hawaii resulting from the state updating its commercial and residential building energy codes in accordance with federal law are significant, estimated to be on the order of nearly $69 million annually by 2030.

Hawaii DOE Determination Letter, May 31, 2013

Hawaii State Certification of Commercial and Residential Building Energy Codes


Current Code:
2015 IECC with Amendments
Amendments / Additional State Code Information:

All Homes:

- Domestic water heating - a solar energy source must apply > 90% of the energy for service water heating

- Fenestration shading options

- Ceiling fan rough-ins for all major living spaces

- Points-based option for prescriptive approach per Section R402.1, allows trade-offs for reduction in wood and steel frame wall and roof insulation.  Each of the options indicated in Table 11 is worth approximately 1% energy increase or decrease and is based on the analysis performed for other options per Section 6.2.3 of the Determination Analysis Report.

Less than 50% Cooled Homes (Tropical Homes)

- Increased attic/roof insulation minimum requirements to R-13 and cool roof.

- Fenestration products must meet Window Solar Heat Gain Coefficient of 0.25 (refer to Section 6.2.2.2)

- Air sealing for all assemblies between conditioned and unconditioned space

- 1.2 cfm/ft2 air leakage allowance of jalousie windows per Section R402.4.3

- Points-based option for prescriptive approach (Section R402.1).  Points options are fewer for naturally ventilated homes.  Each of the options indicated in Table 11 is worth approximately 1% energy increase or decrease and is based on the analysis performed for other options per Section 6.0 of the Determination Analysis report.



Approved Compliance Tools: Can use REScheck
Approximate Energy Efficiency: Equivalent to 2015 IECC
Effective Date:
Adoption Date:
Jul. 14, 2015
Code Enforcement:
Mandatory
Jurisdictions:
County Energy Code Status: http://energy.hawaii.gov/hawaii-energy-building-code
DOE Determination: 2009 IECC: Yes
2012 IECC: Yes
2015 IECC: No

Energy cost savings for Hawaii resulting from the state updating its commercial and residential building energy codes in accordance with federal law are significant, estimated to be on the order of nearly $69 million annually by 2030

Hawaii DOE Determination Letter, May 31, 2013

Hawaii State Certification of Commercial and Residential Building Energy Codes


State Owned / Funded Buildings

Enacted in June 2009, HB 1464 addressed energy efficiency requirements for existing public buildings. By the end of 2010, state agencies must evaluate the energy efficiency of all existing public buildings that are larger than 5,000 square feet or use more than 8,000 kilowatt-hours (kWh) annually. Opportunities for increased energy efficiency must be identified by setting benchmarks for these buildings using Energy Star Portfolio Management or another similar tool. Buildings must be retro-commissioned every five years. Further guidance on the requirements described in HB 1464 will be provided by January 1, 2010.

According to USGBC, on June 26, 2006, Governor Lingle signed HB #2175, thus requiring each state agency to design and construct buildings to meet the LEED Silver certified level, or a comparable standard. The law applies to all new state-owned construction of 5,000 square feet or greater, including K-12 public schools.

Adoption Process

The Hawaii Building Code Council, charged with adopting the ICC suite of codes, follows the ICC code cycle. When an updated Hawaii Model Energy Code is approved by the Council, it goes through a small business review and public hearing process. When approval is obtained at both levels, the Governor approves, and it becomes an Administrative Directive. Such directives apply only to State Government buildings, including Hawaii's approximately 300 public schools and charter schools.

The counties may adopt the model code as is, or modify, provided it is at least as energy efficient as the model code. The energy code bills are introduced to the county councils and are heard by the councils at three hearings. Thereafter, the bills are signed into law by the mayors. There is usually a 60 or 90 day lead-in time after the signing.

Enforcement Process

For all commercial buildings and all residential structures over three stories in height, field inspections by the County Public Works Department (Design & Construction Department in the city and county of Honolulu) are conducted during the established inspection process mandated by the building code. No special procedures are required to enforce the energy requirements.

Enforcement for state buildings is handled by the County Building Departments. State buildings are specifically cited in the state law that mandated which counties must adopt the HMEC or equivalent.

Compliance Process

Low-rise residential buildings (for counties adopting the residential portion of the HMEC) may use a single prescriptive envelope path. Plans are submitted when required by the County Public Works Department. Local jurisdictions require that a registered architect or engineer review and stamp the plans and provide a written statement indicating compliance with the code requirements. However, local jurisdictions still have the obligation to oversee the actual plans that are submitted during the established plan review functions.

Background

The first Hawaii energy code was based on ASHRAE/IES Standard 90-1975. It was mandated by state legislation in 1978 and adopted by three of the four counties in the state in 1978 and 1979. Although the law was mandated, there was no penalty provision.

In 1989 the Department of Business, Economic Development, and Tourism hired a consultant to formulate standards for a new HMEC for commercial and residential structures. The code was finalized in 1993. The HMEC is based on ASHRAE/IESNA 90.1-1989 with modifications to accommodate Hawaii's climate. Changes include the deletion of all space-heating requirements and changes in the building envelope and water-heating requirements.

In 1994, the legislature enacted Act 168 requiring counties to adopt efficiency requirements based on ASHRAE/IES Standard 90.1-1989 by October 24, 1994, for new and renovated commercial buildings.

On August 8, 2001, the city and county of Honolulu, containing 80% of the state's population, adopted portions of ASHRAE 90.1-1999 and required R-19 or equivalent in new residential roofs.

As of March 6, 2006, the Hawaii DBEDT/Energy Efficiency is in the process of developing the "Tropical Energy Code" which will draw from the Guam Energy Code, ASHRAE 90.1-2004, and design considerations unique to the tropics.

On May 21, 2007, Governor Linda Lingle signed SB795 SD2 HD1 CD1, which created a nine-member state building code council to establish a state building code based on the International Building Code.

In May 2009, the Hawaii County Council adopted the 2006 IECC with state-specific amendments. Among them, the new code gives options for roof insulation including cool roofs, advanced ventilation, and low emittance roofs by testing or specification. It also has stricter requirements regarding pools as well as mandatory HVAC and other system commissioning.

On October 13, 2009, the Hawaii Building Code Council approved the 2006 IECC with state-specific amendments as the statewide energy code. The code will become law once an Administrative Directive is approved, which is expected to be signed soon by Gov. Linda Lingle.

The counties of Hawaii are free to modify the statewide code, as long as the codes they adopt are at least as energy efficient. Recent updates to the various county code processes:

  • Hawaii County adopted the amended-2006 IECC state code in May 2009
  • Maui County is expected to adopt the state code soon.
  • Honolulu County is expected to adopt the state code soon
  • Kauai County adopted 2009 IECC in January 2010.

On July 14, 2015, the State Building Code Council adopted the new HEC based on the 2015 IECC/90.1-2013 with amendments.