Publications

To receive updates about BECP publications subscribe to the BECP Mailing List.

Additional resources are also available from the Building America Solution Center.


Document type: State-specific, Technical Assistance report
Publication Date: September 2009
Page Focus: Adoption

This nationwide analysis of commercial energy code compares ASHRAE Standard 90.1-2007 with the commercial code in each state as of June 2009. The results are provided in chapters specific to each state.

States with unique energy codes were not included in the analysis because the codes in these states would be difficult to appropriately compare to ASHRAE Standard 90.1 and most of these states have energy offices that routinely assess their codes against the model codes. In states with codes prior to and including the 2000 IECC or Standard 90.1-1999, those states with no statewide energy code, and home rule states which did not specifically request that another code be used, Standard 90.1-1999 was used as the baseline for comparison.

Three DOE Benchmark buildings were used for the simulation used in this analysis: a medium office building (53,600 ft2), a mid-rise apartment building (33,700 ft2), and a non-refrigerated warehouse (49,500 ft2...

Document type: State-specific, Technical Assistance report
Publication Date: August 2007
Page Focus: Adoption

At the request of the New York State Energy Research and Development Authority and New York State Department of State, the U.S. Department of Energy's Building Energy Codes Program undertook an analysis of the energy savings and cost impacts associated with the proposed adoption of ASHRAE Standard 90.1-2004, and compared it with the requirements based on ASHRAE Standards 90.1-1999 and 90.1-2001.

Document type: State-specific, Technical Assistance report
Publication Date: June 2009
Page Focus: Adoption

The state of New York requested that the U.S. Department of Energy's (DOE's) Building Energy Codes Program (BECP) provide an analysis of the impacts of adoption of ASHRAE Standard 90.1-2007. New York State is unique among states in requiring a ten-year payback for energy code measures. BECP based this analysis on the results of a nationwide, state-by-state code comparison for DOE. This analysis indicates that the adoption of ASHRAE Standard 90.1-2007 is cost-effective under New York’s requirements for all buildings in New York.

Document type: State-specific
Publication Date: July 2013
Page Focus: Adoption

In compliance with Title III of the Energy Conservation and Production Act (ECPA) of 1976, as amended, this is to certify that the State of New York has adopted the 2010 edition of the Energy Conservation Construction Code of New York State (the "2010 ECCCNYS") as New York State's building energy code for residential buildings and non-residential (commercial) buildings.

With regard to residential buildings, the 2010 ECCCNYS is based on, and is equivalent to or more stringent than, the 2009 version of the International Energy Conservation Code.

With regard to commercial buildings, the 2010 ECCCNYS is equivalent to or more stringent than ASHRAE 90.1-2007.