Publications

To receive updates about BECP publications subscribe to the BECP Mailing List.

Additional resources are also available from the Building America Solution Center.


Document type: Analysis, Technical Support Document
Publication Date: May 2015
Page Focus: Compliance

This report documents the technical analysis used to evaluate whether residential buildings constructed to meet the requirements of the 2015 IECC would result in energy efficiency improvements over residential buildings constructed to meet the requirements of the previous edition, the 2012 IECC.

Document type: Other
Publication Date: September 2012
Page Focus: Compliance

The compliance toolkit describes the steps that should be taken by the build community to make sure that their buildings meet the requirements of the energy codes in effect where the buildings are being built and that the building designs are well documented so that the enforcement community can quickly and easily determine if the building meets the requirement of the energy code.

This toolkit describes the steps that should be taken by the build community to make sure that their buildings meet the requirements of the energy codes in effect where the buildings are being built and that the building designs are well documented so that the enforcement community can quickly and easily determine if the building meets the requirement of the energy code.

Document type: Other
Publication Date: September 2012
Page Focus: Adoption, Code Development, Compliance, Enforcement

Buildings account for almost 40% of the energy used in the United States and, as a direct result of that use, our environment and economy are impacted. Building energy codes and standards provide an effective response. The Building Energy Codes Program designed the Adoption, Compliance, and Enforcement (ACE) Learning Series for those in the building industry having the greatest potential to influence the adoption of and compliance with building energy codes and standards. Each toolkit in the ACE Learning Series delivers essential information to enable designers, specifiers, builders, building owners, policy makers, code officials, and others involved in building design and construction to understand the important role building energy codes play in helping us all address our energy, economic, and environmental challenges.

Document type: Other
Publication Date: September 2013
Page Focus: Compliance

This document, concerning Activities and Methodology for Assessing Compliance with Building Energy Codes, is an action issued by the Department of Energy. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

[6450-01-P]
DEPARTMENT OF ENERGY
Office of Energy Efficiency and Renewable Energy
[Docket No. EERE-2013-BT-BC-0036]
Activities and Methodology for Assessing Compliance with Building Energy Codes
AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy.
ACTION: Notice of reopening of public comment period.

Document type: Resource Guide
Publication Date: September 2011
Page Focus: Compliance

The U.S. Department of Energy (DOE) recognizes the enormous potential that exists for improving the energy efficiency, safety and comfort of homes. The 2012 International Energy Conservation Code (IECC) sets the bar for energy efficiency, and air sealing requirements are one of the key provisions.

This guide is a resource for understanding the air leakage requirements in the 2012 IECC and suggestions on how these measures can be met. It also provides information from Building America’s Air Sealing Guide, best Practices and case studies on homes that are currently meeting the provisions. The 2012 IECC and a few International Residential Code requirements are referenced throughout the guide.

Document type: Resource Guide
Publication Date: June 2011
Page Focus: Adoption, Code Development, Compliance

This guide provides key information to policy makers on energy codes and standards and offers guidance on how policy makers can support the creation of statewide energy efficiency goals and standards. In addition, this guide instructs policy makers on how they can:

  • Encourage the adoption of statewide codes.
  • Establish energy code awareness programs.
  • Support enforcement of and compliance with energy codes.
  • Participate in the development of model codes and standards.
  • Determine the viability of the new code.
Document type: Reports and Studies
Publication Date: September 2011
Page Focus: Adoption, Compliance

Conformity assessment is a term used to describe the processes followed to demonstrate that a product, service, management system, or body meets specified requirements, such as standards, codes, laws, regulations, or other criteria. With respect to energy codes, conformity assessment includes all activities and tasks undertaken by any number of entities to ensure that the provisions of an adopted energy code are achieved at a designated point in time. This report identifies and discusses conformity assessment activities and provides guidance for developing new or adjusting existing ways of verifying compliance. In addition, this report looks at different ways to ensure that the energy efficiency goals of an adopted code or standard are achieved.

Document type: Reports and Studies
Publication Date: May 2014
Page Focus: Adoption, Code Development, Compliance, Residential

Pacific Northwest National Laboratory analyzed the relationship between the Residential Energy Services Network (RESNET) Home Energy Rating System (HERS) Index and the traditional simulation-based Performance Path used in the International Energy Conservation Code (IECC). The analysis evaluates, for a single-family residence with various characteristics, the ranges of HERS Index values that would imply compliance with the 2012 IECC Performance Path. Several building characteristics considered likely to result in quantifiable differences in the outcomes of the two approaches, or otherwise believed to be of interest to code developers and policy makers, are considered in the analysis.

Document type: Resource Guide
Publication Date: September 2011
Page Focus: Compliance

Ensuring compliance with HVAC control requirements is difficult, as controls can be difficult to identify on plans or in the building, yet it is a crucial task. HVAC controls are a key driver of building performance and without compliance and enforcement activities, the code requirements may be ignored, overlooked, or misunderstood.

This guide provides an aid that will make it easier to apply the heating, ventilation, and air conditioning (HVAC) control requirements found in building energy codes and addresses requirements defined by 2009 and 2012 editions of the International Energy Conservation Code (IECC) and ASHRAE Standard 90.1-2007 and ASHRAE Standard 90.1-2010.

Document type: Code Notes
Publication Date: August 2012
Page Focus: Compliance

The intent of the pipe insulation requirements is to reduce temperature changes while fluids are being transported through piping associated with heating, cooling or service hot water (SHW) systems, thereby saving energy and reducing operating costs.

Document type: Technical Support Document
Publication Date: March 2019
Page Focus: Compliance

This report explains the methodology used to develop version 4.6.5 of the REScheck software in order to support compliance determination for IECC editions 2009, 2012, 2015, and 2018.