Publications

To receive updates about BECP publications subscribe to the BECP Mailing List.

Additional resources are also available from the Building America Solution Center.


Document type: Technical Assistance report
Publication Date: April 2015
Page Focus: Adoption

Moving to the ANSI/ASHRAE/IES Standard 90.1‐2013 version from the Base Code (90.1‐2010) is cost‐effective overall for the combined commercial buildings in the State of Utah.

Document type: State-specific, Technical Assistance report
Publication Date: September 2009
Page Focus: Adoption

This nationwide analysis of commercial energy code compares ASHRAE Standard 90.1-2007 with the commercial code in each state as of June 2009. The results are provided in chapters specific to each state.

States with unique energy codes were not included in the analysis because the codes in these states would be difficult to appropriately compare to ASHRAE Standard 90.1 and most of these states have energy offices that routinely assess their codes against the model codes. In states with codes prior to and including the 2000 IECC or Standard 90.1-1999, those states with no statewide energy code, and home rule states which did not specifically request that another code be used, Standard 90.1-1999 was used as the baseline for comparison.

Three DOE Benchmark buildings were used for the simulation used in this analysis: a medium office building (53,600 ft2), a mid-rise apartment building (33,700 ft2), and a non-refrigerated warehouse (49,500 ft2...

Document type: State-specific, Technical Assistance report
Publication Date: January 2003
Page Focus: Adoption

This paper presents an assessment of the energy savings and economic impact for New Mexico to adopt the 2000 International Energy Conservation Code. As of the writing of this report, the state of New Mexico bases its commercial building energy code on the 1986 Model Energy Code, which in turn references ASHRAE Standard 90a-1980 for the commercial building portion of the energy code.

Document type: State-specific, Technical Assistance report
Publication Date: August 2007
Page Focus: Adoption

At the request of the New York State Energy Research and Development Authority and New York State Department of State, the U.S. Department of Energy's Building Energy Codes Program undertook an analysis of the energy savings and cost impacts associated with the proposed adoption of ASHRAE Standard 90.1-2004, and compared it with the requirements based on ASHRAE Standards 90.1-1999 and 90.1-2001.

Document type: State-specific, Technical Assistance report
Publication Date: June 2009
Page Focus: Adoption

The state of New York requested that the U.S. Department of Energy's (DOE's) Building Energy Codes Program (BECP) provide an analysis of the impacts of adoption of ASHRAE Standard 90.1-2007. New York State is unique among states in requiring a ten-year payback for energy code measures. BECP based this analysis on the results of a nationwide, state-by-state code comparison for DOE. This analysis indicates that the adoption of ASHRAE Standard 90.1-2007 is cost-effective under New York’s requirements for all buildings in New York.

Document type: State-specific, Technical Assistance report
Publication Date: April 2004
Page Focus: Adoption

This report evaluates the potential costs and benefits to North Dakota residents from updating and requiring compliance with ASHRAE Standard 90.1-2001.

Document type: State-specific, Technical Assistance report
Publication Date: September 2005
Page Focus: Adoption

In 2001, the State of Texas adopted the 2001 International Energy Conservation Codes as its statewide commercial building energy code standard. this report examines the potential impacts of updating lighting requirements in Texas the 2003 IECC.