Publications

To receive updates about BECP publications subscribe to the BECP Mailing List.

Additional resources are also available from the Building America Solution Center.


Document type: Other
Publication Date: September 2012
Page Focus: Adoption

This toolkit was developed by the U.S. Department of Energy’s (DOE) Building Energy Codes Program (BECP) for use by states, municipalities, energy code advocates, policymakers, stakeholders, and all other groups with a vested interest in energy code adoption.

This toolkit provides information and resources to help guide adopting authorities through the adoption process and setting minimum requirements for new construction.

This toolkit provides some insight into how the adoption process may influence the residential and commercial build communities.

Document type: Other
Publication Date: September 2012
Page Focus: Adoption, Code Development, Compliance, Enforcement

Buildings account for almost 40% of the energy used in the United States and, as a direct result of that use, our environment and economy are impacted. Building energy codes and standards provide an effective response. The Building Energy Codes Program designed the Adoption, Compliance, and Enforcement (ACE) Learning Series for those in the building industry having the greatest potential to influence the adoption of and compliance with building energy codes and standards. Each toolkit in the ACE Learning Series delivers essential information to enable designers, specifiers, builders, building owners, policy makers, code officials, and others involved in building design and construction to understand the important role building energy codes play in helping us all address our energy, economic, and environmental challenges.

Document type: Other
Publication Date:
Page Focus: Adoption, Compliance

The Advanced Energy Design Guides (AEDGs) are a series of publications designed to provide recommendations for achieving energy savings over the minimum code requirements of ASHRAE Standard 90.1. This is the first step in the process toward achieving a net zero energy building—defined as a building that, on an annual basis, draws equal or less energy from outside resources than it provides using on-site, renewable energy sources. The guides have been developed in coordination with the following organizations: the American Institute of Architects, the Illuminating Engineering Society of North America, the U.S. Green Building Council, and the U.S. Department of Energy. The New Building Institute participated in the development of the initial guide.

More information on the AEDGs may be found on the Building Technologies Office Commercial Buildings website.

...

Document type: Resource Guide
Publication Date: June 2011
Page Focus: Adoption, Code Development, Compliance

This guide provides key information to policy makers on energy codes and standards and offers guidance on how policy makers can support the creation of statewide energy efficiency goals and standards. In addition, this guide instructs policy makers on how they can:

  • Encourage the adoption of statewide codes.
  • Establish energy code awareness programs.
  • Support enforcement of and compliance with energy codes.
  • Participate in the development of model codes and standards.
  • Determine the viability of the new code.
Document type: Reports and Studies
Publication Date: September 2011
Page Focus: Adoption, Compliance

Conformity assessment is a term used to describe the processes followed to demonstrate that a product, service, management system, or body meets specified requirements, such as standards, codes, laws, regulations, or other criteria. With respect to energy codes, conformity assessment includes all activities and tasks undertaken by any number of entities to ensure that the provisions of an adopted energy code are achieved at a designated point in time. This report identifies and discusses conformity assessment activities and provides guidance for developing new or adjusting existing ways of verifying compliance. In addition, this report looks at different ways to ensure that the energy efficiency goals of an adopted code or standard are achieved.

Document type: Reports and Studies
Publication Date: May 2013
Page Focus: Adoption

The purpose of this analysis is to examine the cost-effectiveness of the 2010 edition of ANSI/ASHRAE/IES1 Standard 90.1. Standard 90.1 is the model energy standard for commercial and multi-family residential buildings over three floors (ECPA, Public Law 94-385). PNNL analyzed the cost-effectiveness of changes in Standard 90.1 from 90.1-2007 to 90.1-2010, as applied in the United States. During the development of new editions of Standard 90.1, the cost-effectiveness of individual changes (addenda) is often calculated to support the deliberations of Standard Standing Project Committee (SSPC) 90.1. The process does not include analysis of the cost-effectiveness of the entire package of addenda from one version of the standard to the next. Providing States with an analysis of cost-effectiveness may encourage more rapid adoption of newer editions of energy codes based on Standard 90.1. This information may also inform the development of future editions of Standard 90.1.

Document type: Reports and Studies
Publication Date: December 2014
Page Focus: Adoption

This report and an accompanying spreadsheet compile the end use building simulation results for prototype buildings throughout the United States. The results represent the energy use of each edition of ANSI/ASHRAE/IES Standard 90.1, Energy Standard for Buildings Except Low-Rise Residential Buildings.

Document type: Analysis, Reports and Studies
Publication Date: March 2017
Page Focus: Adoption, Compliance

This study used a three-step process to evaluate the degree to which high-impact controls requirements included in commercial energy codes are realizing their savings potential. The three-step process included: (1) interviews of commissioning agents; (2) field audits of a sample of commercial buildings to determine how well control measures are being designed, commissioned and correctly implemented; and (3) analysis of the information gathered.

Document type: State-specific
Publication Date: October 2013
Page Focus: Adoption

Letter from the Kentucky Department of Housing, Buildings and Construction requesting a deadline to file Kentucky's certification statement with respect to ASHRAE Standard 90.1-2010.

Document type: Resource Guide
Publication Date: September 2012
Page Focus: Adoption, Code Development, Compliance

This guide provides information for anyone dealing with a lighting energy code or standard. It provides background and development information to help readers understand the basis for requirements and their intent. The guide also provides detailed explanations of the major types of requirements such that users can more effectively design to meet compliance while applying the most flexibility possible.

Publication Date: July 2013
Page Focus: Adoption

The energycode for one- and two-family residential structures in Louisiana is Part IV: Energy Conservation of the 2006 IRC. 2009 IECC is currently being enforced in low-rise, multifamily residential structures. ASHRAE 90.1-2007 is currently enforced for commercial construction.

This letter certifies that ACT 390 of 2013 has been signed by the Governor, and it will update Part IV: Energy Conservation of the 2009 IRC effective January 1, 2014, and that ASHRAE Standard 90.1-2007 is the code  currently enforced by the Louisiana Office of the State Fire Marshal for commercial construction.

Document type: Reports and Studies
Publication Date: January 2015
Page Focus: Adoption

The purpose of this analysis is to examine the cost-effectiveness of the 2013 edition of ANSI/ASHRAE/IES1 Standard 90.1 (ANSI/ASHRAE/IES 2013). PNNL analyzed the cost-effectiveness of changes in Standard 90.1 from 90.1-2010 to 90.1-2013, as applied in commercial buildings across the United States. During the development of new editions of Standard 90.1, the cost-effectiveness of individual changes (addenda) is often calculated to support the deliberations of ASHRAE Standard Standing Project Committee (SSPC) 90.1. The ASHRAE process, however, does not include analysis of the cost-effectiveness of the entire package of addenda from one edition of the standard to the next, which is of particular interest to adopting State and local governments. Providing States with an analysis of cost-effectiveness may encourage more rapid adoption of newer editions of energy codes based on Standard 90.1. This information may also inform the development of future editions of Standard 90.1.

Document type: State-specific
Publication Date: July 2013
Page Focus: Adoption

The State of Tennessee, Department of Commerce and Insurance, Division of Fire Prevention certifies that it has adopted the 2006 International Energy Conservation Code (IECC) for one and two family dwellings and townhouses and non-State owned commercial buildings, and ASHRAE 90.1-2007 for State Buildings.