Publications

To receive updates about BECP publications subscribe to the BECP Mailing List.

Additional resources are also available from the Building America Solution Center.


Document type: Other
Publication Date: September 2012
Page Focus: Adoption

This toolkit was developed by the U.S. Department of Energy’s (DOE) Building Energy Codes Program (BECP) for use by states, municipalities, energy code advocates, policymakers, stakeholders, and all other groups with a vested interest in energy code adoption.

This toolkit provides information and resources to help guide adopting authorities through the adoption process and setting minimum requirements for new construction.

This toolkit provides some insight into how the adoption process may influence the residential and commercial build communities.

Document type: Other
Publication Date: September 2012
Page Focus: Compliance

The compliance toolkit describes the steps that should be taken by the build community to make sure that their buildings meet the requirements of the energy codes in effect where the buildings are being built and that the building designs are well documented so that the enforcement community can quickly and easily determine if the building meets the requirement of the energy code.

This toolkit describes the steps that should be taken by the build community to make sure that their buildings meet the requirements of the energy codes in effect where the buildings are being built and that the building designs are well documented so that the enforcement community can quickly and easily determine if the building meets the requirement of the energy code.

Document type: Other
Publication Date: September 2012
Page Focus: Adoption, Code Development, Compliance, Enforcement

Buildings account for almost 40% of the energy used in the United States and, as a direct result of that use, our environment and economy are impacted. Building energy codes and standards provide an effective response. The Building Energy Codes Program designed the Adoption, Compliance, and Enforcement (ACE) Learning Series for those in the building industry having the greatest potential to influence the adoption of and compliance with building energy codes and standards. Each toolkit in the ACE Learning Series delivers essential information to enable designers, specifiers, builders, building owners, policy makers, code officials, and others involved in building design and construction to understand the important role building energy codes play in helping us all address our energy, economic, and environmental challenges.

Document type: Other
Publication Date: September 2013
Page Focus: Compliance

This document, concerning Activities and Methodology for Assessing Compliance with Building Energy Codes, is an action issued by the Department of Energy. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

[6450-01-P]
DEPARTMENT OF ENERGY
Office of Energy Efficiency and Renewable Energy
[Docket No. EERE-2013-BT-BC-0036]
Activities and Methodology for Assessing Compliance with Building Energy Codes
AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy.
ACTION: Notice of reopening of public comment period.

Document type: Reports and Studies
Publication Date: March 2014
Page Focus: Program

Commercial and residential buildings account for approximately 41% of all energy consumption and 72% of electricity usage in the United States. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, assuring reductions in energy use and greenhouse gas emissions over the life of buildings. The U.S. Department of Energy (DOE), through the Building Energy Codes Program (BECP or the Program), supports the improvement of energy efficiency in buildings.

BECP periodically assesses the impacts of its activities by estimating historical and projected energy savings, consumer savings, and avoided emissions. The Pacific Northwest National Laboratory (PNNL) conducted the codes benefits assessment in support of the BECP. Underlying the assessment is a series of calculations that estimate and compare energy savings under two scenarios: "with BECP" and "without BECP." The analysis covers the years 1992-2040...

Document type: Resource Guide
Publication Date: June 2011
Page Focus: Adoption, Code Development, Compliance

This guide provides key information to policy makers on energy codes and standards and offers guidance on how policy makers can support the creation of statewide energy efficiency goals and standards. In addition, this guide instructs policy makers on how they can:

  • Encourage the adoption of statewide codes.
  • Establish energy code awareness programs.
  • Support enforcement of and compliance with energy codes.
  • Participate in the development of model codes and standards.
  • Determine the viability of the new code.
Document type: Reports and Studies
Publication Date: September 2011
Page Focus: Adoption, Compliance

Conformity assessment is a term used to describe the processes followed to demonstrate that a product, service, management system, or body meets specified requirements, such as standards, codes, laws, regulations, or other criteria. With respect to energy codes, conformity assessment includes all activities and tasks undertaken by any number of entities to ensure that the provisions of an adopted energy code are achieved at a designated point in time. This report identifies and discusses conformity assessment activities and provides guidance for developing new or adjusting existing ways of verifying compliance. In addition, this report looks at different ways to ensure that the energy efficiency goals of an adopted code or standard are achieved.

Document type: Model Data
Publication Date: April 2014
Page Focus: Code Development

EnergyPlus TMY3 weather files for 17 climate locations associated with the ASHRAE Standard 90.1 and IECC Prototype Building Models.

See the Commercial Prototype Building Models page for the individual weather data files listed by Climate Zone. Updated file posted 10/22/18.

See the Residential Prototype Building Models page for the individual weather data files listed by Climate Zone. New file posted 2/24/20.

Document type: Resource Guide
Publication Date: September 2011
Page Focus: Compliance

Ensuring compliance with HVAC control requirements is difficult, as controls can be difficult to identify on plans or in the building, yet it is a crucial task. HVAC controls are a key driver of building performance and without compliance and enforcement activities, the code requirements may be ignored, overlooked, or misunderstood.

This guide provides an aid that will make it easier to apply the heating, ventilation, and air conditioning (HVAC) control requirements found in building energy codes and addresses requirements defined by 2009 and 2012 editions of the International Energy Conservation Code (IECC) and ASHRAE Standard 90.1-2007 and ASHRAE Standard 90.1-2010.

Document type: State-specific
Publication Date: October 2013
Page Focus: Adoption

Letter from the Kentucky Department of Housing, Buildings and Construction requesting a deadline to file Kentucky's certification statement with respect to ASHRAE Standard 90.1-2010.

Publication Date: July 2013
Page Focus: Adoption

The energycode for one- and two-family residential structures in Louisiana is Part IV: Energy Conservation of the 2006 IRC. 2009 IECC is currently being enforced in low-rise, multifamily residential structures. ASHRAE 90.1-2007 is currently enforced for commercial construction.

This letter certifies that ACT 390 of 2013 has been signed by the Governor, and it will update Part IV: Energy Conservation of the 2009 IRC effective January 1, 2014, and that ASHRAE Standard 90.1-2007 is the code  currently enforced by the Louisiana Office of the State Fire Marshal for commercial construction.

Document type: State-specific
Publication Date: July 2013
Page Focus: Adoption

The State of Tennessee, Department of Commerce and Insurance, Division of Fire Prevention certifies that it has adopted the 2006 International Energy Conservation Code (IECC) for one and two family dwellings and townhouses and non-State owned commercial buildings, and ASHRAE 90.1-2007 for State Buildings.