This document is a list of Alaska-specific amendments to the 2009 International Energy Conservation Code, adopted by the Alaska Housing Finance Corporation (AHFC) on March 9, 2011. It is meant to be read in conjunction with the 2009 IECC and ASHRAE Standard 62.2-2010 which may be purchased at local bookstores or online. These amendments comprise both the residential and commercial Building Energy Efficiency Standards (BEES) for AHFC-funded residential mortgage loans and energy rebates, and energy retrofits of public buildings. These amendments supplant the BEES amendments to the 2006 IECC for residential projects as adopted on June 17, 2009, and include the amendments previously made to the 2009 IECC known as the “Commercial BEES.”
To receive updates about BECP publications subscribe to the BECP Mailing List.
Additional resources are also available from the Building America Solution Center.
The International Energy Conservation Code (IECC) prototype building models (prototype models) were developed by Pacific Northwest National Laboratory (PNNL), in support of DOE's Building Energy Codes Program (BECP), to simulate energy savings associated with changes in energy codes and standards. For residential buildings, PNNL utilized two base prototypes to simulate both Single-family detached house, and Multi-family low-rise apartment building types. Energy models for the 2006, 2009 and 2012 versions of the IECC are available for each state.
This set of IECC Prototype Building Models is for the state of Alaska, using the 2006 IECC as the baseline code.
Each ZIP file includes EnergyPlus model input files (.idf) and corresponding output files (.html).
This nationwide analysis of commercial energy code compares ASHRAE Standard 90.1-2007 with the commercial code in each state as of June 2009. The results are provided in chapters specific to each state.
States with unique energy codes were not included in the analysis because the codes in these states would be difficult to appropriately compare to ASHRAE Standard 90.1 and most of these states have energy offices that routinely assess their codes against the model codes. In states with codes prior to and including the 2000 IECC or Standard 90.1-1999, those states with no statewide energy code, and home rule states which did not specifically request that another code be used, Standard 90.1-1999 was used as the baseline for comparison.
Three DOE Benchmark buildings were used for the simulation used in this analysis: a medium office building (53,600 ft2), a mid-rise apartment building (33,700 ft2), and a non-refrigerated warehouse (49,500 ft2...
This analysis of residential energy code compares the requirements of the 2009 International Energy Conservation Code (IECC) with the residential code—or typical construction practice in the absence of a code—in most states as of June 2009. The results, which include estimated typical energy savings of updating each state’s code to the 2009 IECC, are provided in chapters specific to each state.
Several states have either not adopted a mandatory energy code or developed their own codes which have minimal or no connection to the IECC. The latter—including California, Florida, Oregon, and Washington— were not included in this analysis because the codes in these states would be difficult to appropriately compare to the 2009 IECC and most of these states have energy offices that have already assessed the IECC on their own.
These analyses evaluate the cost-effectiveness of the prescriptive path of the 2015 edition of the International Energy Conservation Code (IECC), relative to the 2006 IECC for all 50 states and the District of Columbia. The analysis covers one- and two-family dwelling units, town-homes, and low-rise multifamily residential buildings covered by the residential provisions of the 2015 IECC. These reports were originally published in October 2015, and updated in February 2016 to update numbers reported in certain results tables.