HVAC Design for Low-Load Homes: ACCA Low Load Home Manual

Homes built to today’s building codes have tight envelopes (low infiltration!), high levels of insulation (low thermal conductivity!), and ducts in the conditioned space (small duct losses!). This leads to a situation where the home has comparatively low heating and cooling loads; say, 1500 ft2 or more of conditioned space per ton of mechanical cooling. The HVAC design problem becomes … how does a contractor cost-effectively ensure occupant comfort in a 2400 ft2 newly-constructed home where the sized HVAC equipment is only 1.5 ton … and providing only 600 CFM of air delivery for the entire home? This session will address the design considerations, equipment offerings, and trade-offs of low-load homes.

This is the third event in the 2020 Building Energy Code Webinar Series  A recording of this event will be posted here following the broadcast.

Register Now

Estimated Length: 
60 minutes
Presenters: 
John Sedine, Consulting Engineer
Original Webcast Date: 
Thursday, October 15, 2020 - 1:00pm
Time Zone: 
Eastern Time
CEUs Offered: 
1.0 AIA LUs/HSW and .10 CEUS for ICC continuing education credits available for the "LIVE EVENT ONLY"
Course Type: 
Webinar