Showing results 26 - 50 of 82
This Executive Summary provides a high level review of the results for the Rhode Island Energy Code Compliance Baseline Study. In this section, we state the study objectives, summarize the evaluation approach, and present key findings, conclusions and recommendations.
This report presents the results of a Study on the rate of compliance with the New York State (NYS) energy code. The Study tested the protocols developed by the US Department of Energy to determine if NYS’s new and renovated residential and commercial buildings exceed the 90% compliance threshold that states will be will be required to meet by 2017 as part of ARRA legislation. This Study performed detailed plan review and field inspections on 44 newly constructed residential and 26 new commercial buildings. The Study also included interviews with policy makers, contractors, engineers, architects, and code officials; and surveys of architects, homeowners, builders, and code officials who planned, constructed and inspected renovations.
The Nebraska Energy Office (NEO) commissioned Britt/Makela Group, Inc. (BMG) to assess compliance with the commercial provisions of the 2009 International Energy Conservation Code (IECC). The goals of the project were to:
- Assess compliance rates for projects that represented typical commercial construction in Nebraska
- Collect information on energy code compliance issues that could be used to establish a framework for future energy code implementation programs in the state.
This report provides the results and methodologies for the 2010-2011 Iowa Energy Code Pilot Study that was conducted by the Iowa Department of Public Safety, division of State Fire Marshal, State Building Code Bureau. This study was funded by the U.S. Department of Energy with support from Pacific Northwest National Laboratories – Building Energy Codes Project and the Midwest Energy Efficiency Alliance (MEEA). Preliminary work on the study began in May of 2010. A contract with MEEA was signed in October 2010 with work commencing on the study in January 2011. The primary goal of the study was to determine the rate of compliance with the 2009 International Energy Conservation Code throughout the state of Iowa. Secondary goals of the study were to determine average energy code inspection durations, provide training to local code officials and builders participating in the study, and to determine areas of improvement.
The goals of this study were threefold: 1) Provide feedback to the BECP on the implementation of the BECP protocol 2) Develop a preliminary pattern/range of the existing compliance rates of newly constructed residential dwellings and commercial buildings based on jurisdictions in Illinois that have adopted the building energy codes and 3) Identify areas where home performance and codes training and education activities could be improved or refocused. Measurements of a small sample set (10) of commercial buildings were also taken. Due to the insignificance sample size, a commercial compliance rate is not reported here.
Project Goal: Assess and record energy code compliance of buildings currently under construction, following the U.S. Department of Energy (DOE) processes, in compliance with the American Recovery and Reinvestment Act of 2009 (ARRA), and identify procedural changes in code enforcement and training needed to improve compliance rates.
This study was conducted to estimate as-built energy use characteristics for homes that were not part of the Energy Efficiency Fund New Construction Program (RNC) as a baseline for the RNC Program. Resulting information will be applied to estimation of the net effects of the RNC Program on efficiency improvements. Additionally, these results are used to establish preliminary estimates of User Defined Reference Home (UDRH) inputs to be used as baseline characteristics against which construction within the RNC Program can be compared. Findings are based on the results of on-site inspections, including Home Energy Rating System (HERS) ratings, of 69 homes that were not part of the RNC program, were completed from November 2009 through July 2011, and whose owners agreed to have their home inspected.
Summary of the findings of the 2003 Residential New Construction Baseline Study conducted by Itron, Inc. under Pacific Gas & Electric (PG&E) management.1 KEMA-Xenergy conducted the on-site surveys. The RNC baseline study investigates energy efficiency in newly constructed single family homes throughout California. The study’s primary purpose is to provide information to residential new construction (RNC) program managers across the state, thereby allowing them to assess and address the effect of recent energy code changes on these programs.
From August 1997 to September 1999, one hundred new Arkansas homes were evaluated in two areas in the state where there was significant building activity in order to determine the energy performance of current building practices. One of the positive findings was that homes are now being built significantly tighter than a few years ago. Homes built in the early to in.id 1990's were experiencing an average of 0.5 natural air changes per hour (NACH), an acceptable level considered normal for new construction Only 24 homes in this evaluation had leakage rates exceeding 0.4 NACH; the majority of homes (58 percent) had leakage rates of 0.35 and under.