Publications

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.

This report explains the methodology used to develop version 4.6.5 of the REScheck software in order to support compliance determination for IECC editions 2009, 2012, 2015, and 2018.

2018 IECC Residential Compliance Evaluation Forms

2015 IECC Residential Compliance Evaluation Forms

2012 IECC Residential Compliance Evaluation Forms

2009 IECC Residential Compliance Evaluation Forms

The data (in this file or on this page) represents the data collected as DOE’s Residential Field Study[1] as of June 2016.  Data is provided Microsoft Excel for 8 states – AL, KY, MD, NC, PA, TX, AR and GA.  Additional states using DOE’s field study methodology, may be added in the future as data collection and analysis is completed.  

This data file was reformatted and revised May 28, 2019, and again July 17, 2019.

Residential Energy Code Field Study Contact List; 011516.

Presentation slides prepared for Residential Field Study stakeholder participants.  

The U.S. Department of Energy has provided funding for states to conduct residential field studies, with the purpose of identifying opportunities for energy code training & education in new construction. The participation of builders and local building departments is crucial in supporting this important activity.  This Fact Sheet summarizes this field study.

Presentation slides from a 12/7/15 webinar that provided an overview of the U.S. Department of Energy Building Energy Codes residential field study, including methodology, sampling and current status. Data gathered across 10 states were reviewed, followed by a summary of initial findings that can inform future education & training activities. The potential savings associated with these activities were also be presented, which are of interest to government agencies, utilities and other entities.

A research project in the state of Texas identified opportunities to reduce homeowner utility bills in residential single-family new construction by increasing compliance with the state energy code. The study was initiated in October 2014; data collection began in March 2015, and continued through October 2015. During this period, research teams visited 133 homes in 30 counties in and around Houston during various stages of construction, resulting in a substantial data set based on observations made directly in the field.

A research project in the Commonwealth of Pennsylvania identified opportunities to reduce homeowner utility bills in residential single-family new construction by increasing compliance with the state energy code. The study was initiated in October 2014 and continued through July 2015. During this period, research teams visited 171 homes during various stages of construction, resulting in a substantial data set based on observations made directly in the field.

A research project in the State of North Carolina identified opportunities to reduce homeowner utility bills in residential single-family new construction by increasing compliance with the state energy code. The study was initiated in January 2015 and continued through September 2015. During this period, research teams visited 249 homes during various stages of construction, resulting in a substantial data set based on observations made directly in the field.

In early 2017, the Nebraska Energy Office expressed interest in evaluating the construction of new single-family homes in Nebraska using the US Department of Energy’s (DOE) low-rise residential evaluation methodology.1 As part of that methodology, Pacific Northwest National Laboratory (PNNL) was directed by DOE to analyze the data collected in Nebraska. This memorandum provides and discusses the results of PNNL’s analysis.

A research project in the state of Montana identified opportunities to reduce homeowner utility bills in residential single-family new construction by increasing compliance with the state energy code. The study was initiated in May 2018; data collection began in June 2018 and continued through September 2018. During this period, the project team visited 125 homes at various stages of construction, resulting in a data set based on observations made directly in the field.

A research project in the state of Maryland investigated energy code-related aspects of residential single-family new construction. The study was initiated in January 2015 and continued through July 2015. During this period, research teams visited 207 homes during various stages of construction, resulting in a substantial data set based on observations made directly in the field.

A research project in the Commonwealth of Kentucky identified opportunities to reduce homeowner utility bills in residential single-family new construction by increasing compliance with the state energy code. The study was initiated in April 2015 and continued through August 2015. During this period, research teams visited 140 homes during various stages of construction, resulting in a substantial data set based on observations made directly in the field.

A research project in the state of Idaho identified opportunities to reduce homeowner energy costs in residential single-family new construction by increasing compliance with the current state energy code. The study was initiated in January 2018; data collection began in March 2018 and continued through June 2018. During this period, research teams visited 127 homes during various stages of construction, resulting in a collection of data based on observations made directly in the field.

A research project in the State of Georgia investigated the energy code-related aspects of unoccupied, newly constructed, single family homes across the state. The study followed a DOE-prescribed methodology, which allowed the project team to build an empirical data set based on observations made directly in the field.

A research project in the State of Arkansas investigated the energy code-related aspects of unoccupied, newly constructed, single family homes across the state. The study followed a DOE-prescribed methodology, which allowed the project team to build an empirical data set based on observations made directly in the field.

A research project in the state of Alabama identified opportunities to reduce homeowner utility bills in residential single-family new construction by increasing compliance with the state energy code. The study was initiated in March 2014, and continued through May 2014. During this period, research teams visited 134 homes during various stages of construction, resulting in a substantial data set based on observations made directly in the field.

Pacific Northwest National Laboratory (PNNL), funded by DOE, conducted an assessment of the prospective impacts of national model building energy codes from 2010 through 2040. A previous PNNL study evaluated the impact of the Building Energy Codes Program; this study looked more broadly at overall code impacts. This report describes the methodology used for the assessment and presents the impacts in terms of energy savings, consumer cost savings, and reduced CO2 emissions at the state level and at aggregated levels.