Publications

62 Commercial Buildings were evaluated for compliance with the 2009 IECC/ASHRAE 90.1-2007 be-tween October 1, 2010 and June 30, 2011. Of that number, 17 buildings were eventually dropped from the study for several reasons: Building would not be completed within time frame and no similar building could be found to merge Project “died” prior to construction ever starting Building was completed or nearly so prior to first visit by Evaluator.

Project Goal: Assess and record energy code compliance of buildings currently under construction, following the U.S. Department of Energy (DOE) processes, in compliance with the American Recovery and Reinvestment Act of 2009 (ARRA), and identify procedural changes in code enforcement and training needed to improve compliance rates.

Summary of the findings of the 2003 Residential New Construction Baseline Study conducted by Itron, Inc. under Pacific Gas & Electric (PG&E) management.1 KEMA-Xenergy conducted the on-site surveys. The RNC baseline study investigates energy efficiency in newly constructed single family homes throughout California. The study’s primary purpose is to provide information to residential new construction (RNC) program managers across the state, thereby allowing them to assess and address the effect of recent energy code changes on these programs.

This document is intended to be a reference manual for the Appendix G Performance Rating Method (PRM) of ANSI/ASHRAE/IES Standard 90.1-2019 (Standard 90.1-2019).

The Department of Energy (DOE) Building Energy Codes Program (BECP) periodically evaluates national and state-level impacts associated with energy codes in residential and commercial buildings. Pacific Northwest National Laboratory (PNNL), funded by DOE, conducted an assessment of the prospective impacts of national model building energy codes from 2010 through 2040. 

November 16, 2023 - Building Energy Codes Webinar Series: What You Need to Know About the New Energy Standard for Commercial Buildings: ASHRAE 90.1-2022 presentation.

This report describes solutions to the common PRM adoption challenges, including calculating energy savings by fuel type and electricity demand savings relative to current code and avoiding “fuel switching” when reporting savings of the proposed design relative to the current code. The calculations described in this technical support document are automated in the ASHRAE Standard 90.1 Performance Based Compliance Form and the Compliance Form Companion Tool

The commercial IECC prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. The prototype models include 16 building types in 19 climate locations for for recent editions of the IECC. Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key modeling input information.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the Manufactured Housing Prototype Building Models.

The ASHRAE Standard 90.1 prototype building models were developed by Pacific Northwest National Laboratory in support of the U.S. Department of Energy's (DOE's) Building Energy Codes Program. These prototype buildings were derived from DOE's Commercial Reference Building Models. The prototype models include 16 building types in 19 climate locations for recent editions of ASHRAE Standards 90.1. Also included is a scorecard for each prototype building. The scorecard is a spreadsheet that summarizes the building descriptions, thermal zone internal loads, schedules and other key modeling input information.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the Manufactured Housing Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the Manufactured Housing Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the IECC Prototype Building Models.

EnergyPlus TMY3 weather file for climate location associated with the Manufactured Housing Prototype Building Models.