Publications

From August 1997 to September 1999, one hundred new Arkansas homes were evaluated in two areas in the state where there was significant building activity in order to determine the energy performance of current building practices. One of the positive findings was that homes are now being built significantly tighter than a few years ago. Homes built in the early to in.id 1990's were experiencing an average of 0.5 natural air changes per hour (NACH), an acceptable level considered normal for new construction Only 24 homes in this evaluation had leakage rates exceeding 0.4 NACH; the majority of homes (58 percent) had leakage rates of 0.35 and under.

Quantitative analysis performed in support of the Standard 90.1-1999 Determination.

Qualitative analysis performed in support of the Standard 90.1-1999 Determination.

Quantitative analysis performed in support of the Standard 90.1-2004 Determination.

The objective of this report is to assess the compliance of newly-constructed single-family homes with the Vermont Residential Building Energy Standards (RBES). This analysis is part of a broader study of the single-family residential new construction market in Vermont.

This document outlines the organization and division of the Oklahoma Uniform Building Code Commission.

This guide includes practical plan review and inspection resources, including the U.S. Department of Energy Building Energy Codes Program's REScheck™ and COMcheck™ quick reference guides, case studies, and sample inspection checklists; as well as excerpts from International Code Council's commentaries, workbooks, and code companion materials.

This collection also includes many other helpful items and points to further resources available on the web. Residential and commercial building officials can easily add state and local guidance in order to use this binder as a one-stop resource to support compliance in the field.

Qualitative analysis performed in support of the Standard 90.1-2007 Determination.

Quantitative analysis Performed in support of the Standard 90.1-2007 Determination.

The Tennessee State Fire Marshal’s Office will implement enforcement of adopted energy codes for new building project submissions as of Friday, July 1, 2011. The energy codes adopted are:

• All buildings other than state buildings: The 2006 International Energy Conservation Code
• State buildings: ASHRAE Standard 90.1-2007.

This guide provides key information to policy makers on energy codes and standards and offers guidance on how policy makers can support the creation of statewide energy efficiency goals and standards. In addition, this guide instructs policy makers on how they can:

• Encourage the adoption of statewide codes.
• Establish energy code awareness programs.
• Support enforcement of and compliance with energy codes.
• Participate in the development of model codes and standards.
• Determine the viability of the new code.

This report provides the results and methodologies for the 2010-2011 Iowa Energy Code Pilot Study that was conducted by the Iowa Department of Public Safety, division of State Fire Marshal, State Building Code Bureau. This study was funded by the U.S. Department of Energy with support from Pacific Northwest National Laboratories – Building Energy Codes Project and the Midwest Energy Efficiency Alliance (MEEA). Preliminary work on the study began in May of 2010. A contract with MEEA was signed in October 2010 with work commencing on the study in January 2011. The primary goal of the study was to determine the rate of compliance with the 2009 International Energy Conservation Code throughout the state of Iowa. Secondary goals of the study were to determine average energy code inspection durations, provide training to local code officials and builders participating in the study, and to determine areas of improvement.

The goals of this study were threefold: 1) Provide feedback to the BECP on the implementation of the BECP protocol 2) Develop a preliminary pattern/range of the existing compliance rates of newly constructed residential dwellings and commercial buildings based on jurisdictions in Illinois that have adopted the building energy codes and 3) Identify areas where home performance and codes training and education activities could be improved or refocused. Measurements of a small sample set (10) of commercial buildings were also taken. Due to the insignificance sample size, a commercial compliance rate is not reported here.

This guide is designed to help state and local governments design and implement successful "beyond code" programs for new commercial and residential buildings. The goal is to help states and localities establish voluntary or mandatory programs that go well beyond traditional minimum code requirements for new buildings.

This guide provides key information on energy codes tailored for architects and provides guidance on how they can support the adoption of new or updated energy codes and the resources needed to ensure compliance with what is adopted. The guide also includes information on the importance of architects in the development and compliance verification processes; information on the interface between codes and the design process; design and compliance tools; information on building construction and commissioning, and many other resources that are key to helping architects understand the important role energy codes through the design process play in addressing our energy, economic and environmental challenges.

This guide provides an aid that will make it easier to apply the heating, ventilation, and air conditioning (HVAC) control requirements found in building energy codes and addresses requirements defined by 2009 and 2012 editions of the International Energy Conservation Code (IECC) and ASHRAE Standard 90.1-2007 and ASHRAE Standard 90.1-2010.

This guide is a resource for understanding the air leakage requirements in the 2012 IECC and suggestions on how these measures can be met. It also provides information from Building America’s Air Sealing Guide, best Practices and case studies on homes that are currently meeting the provisions. The 2012 IECC and a few International Residential Code requirements are referenced throughout the guide.

Quantitative analysis performed in support of the Standard 90.1-2010 Determination.

Qualitative analysis performed in support of the Standard 90.1-2010 Determination.

Location modifiers for residential construction that may be applied to the Baseline Prototype cost model home completed in Work Order 1 or nationwide average construction costs in support of the Building Component Cost Community Tool (BC3), designed to assist cost estimators, builders, architects and engineers to evaluate potential cost of energy efficient components.

National Energy and Cost Savings for New Single- and Multifamily Homes: A Comparison of the 2006, 2009, and 2012 Editions of the IECC

These analyses evaluate the cost-effectiveness of the prescriptive path of the 2009 and 2012 editions of the International Energy Conservation Code (IECC), relative to the 2006 IECC for all 50 states and the District of Columbia. The analysis covers one- and two-family dwelling units, town-homes, and low-rise multifamily residential buildings covered by the residential provisions of the 2009 and 2012 IECC.

These analyses evaluate the cost-effectiveness of the prescriptive path of the 2009 and 2012 editions of the International Energy Conservation Code (IECC), relative to the 2006 IECC for all 50 states and the District of Columbia. The analysis covers one- and two-family dwelling units, town-homes, and low-rise multifamily residential buildings covered by the residential provisions of the 2009 and 2012 IECC.